Apex Glyder

$374.99 CAD
$374.99 CAD $374.99 CAD
Sale Sold out

Ergo Glyder

$249.99 CAD
$249.99 CAD
Sale Sold out

Pro Glyder

$349.99 CAD
$349.99 CAD $349.99 CAD
Sale Sold out

HAG Capisco 8106 Chair

$1,987.00 CAD
$1,987.00 CAD
Sale Sold out

Chair Mat for Carpeted Floors

$74.99 CAD
$74.99 CAD
Sale Sold out

Chair Mats for Hardwood Floors

$54.99 CAD
$54.99 CAD $54.99 CAD
Sale Sold out

Free shipping on all orders to the contiguous 48 United States and Canada!                         ✨20% off storewide when above $300 CAD spent

1 5

Solo Ryzer Frame

Solo Ryzer Frame

FLT-02-White

$475.00 CAD
$475.00 CAD $475.00 CAD
Sale Sold out

Enjoy 20% OFF on your cart when you spend over $300!

The Solo Ryzer frame is an adjustable two-leg synchronized dual-motor lifting system. It's the perfect base for your standing desk or workstation, offering you a variety of customization and personalization. With the dual-motor, height-adjustable range of 25.5" that moves at a speed of 1.57"/sec and a frame width that can be adjusted from 43.0" - 72.4" to fit either of our tabletop sizes, it is the epitome of adjustability.

Safety is a core feature of this desk frame also, with a collision-detection feature that will halt your desk from moving if it senses something in the way. This desk is also extremely durable, with a 15-year warranty offered to reflect its guaranteed durability and quality.

Installation is simple, with step-by-step instructions included with every purchase, and this desk frame can be combined with your own tabletop. Alternatively, you can also choose from our selection for a full Solo Ryzer standing desk. Find our instructional PDF manual to help you with the installation here.

A control box and remote control with preset position options as well as a USB charging port are all included.

  • Motor System Dual
  • Column Stages 3
  • Frame Colors Black, White, Gray
  • Surface Finish Powder Coat
  • Included Accessories Wired-Remote, Self-Adhesive Cable Ties
  • Weight Capacity 270 lbs
  • Speed 1.57"/sec
  • Frame Height 23.6" - 49.1"
  • Frame Width 43.0" - 72.4"
  • Noise Rating <45dB
  • Protection Class IP51
  • Сertification BIFMA
  • Number of Remote Options More Info
  • Memory Positions 4
  • Collision Detection Yes
  • Child Lock Yes
  • Sit Stand Reminder Yes (RT-16 and RT-18 only)
  • Energy Saving Mode Yes
  • Soft Start & Stop Yes
  • Input Voltage 120 VAC
  • Output Voltage 24 VDC
  • Foot Length 27.5"
  • Adjustable Feet Yes
  • Material Steel
  • Duty Cycle 10%
  • Weight 65.0 lbs
  • Warranty 15 Years
  • Install Time 20 mins
pdf manuals
FLT-02-Black User Manual
In stock
Free shipping to the 48 United States and Canada
Ships within 24 hours
15 Years Warranty
View full details

Dual Motor
270 lbs Weight Capacity
24" to 49" Height Range
Fast Adjustment (1.57"/sec)

Safety and Adjustability

A reliable base for your standing desk

The Solo Ryzer frame provides a versatile foundation for your standing desk, allowing for personalized customization. Its dual motors and sufficient frame width ensure vast adjustability options to meet your needs. Since safety is a priority, this frame features collision detection to prevent desk obstructions. Installation is straightforward with step-by-step instructions, and it can be paired with your tabletop or chosen from our tabletop collection.

Learn More

Recently Viewed

FREQUENTLY ASKED QUESTIONS

Compatibility

Can the Corner Ryzer be used as a Solo Ryzer temporarily until I find more space?

The Corner Ryzer cannot be used as a Solo Ryzer at this time. The control box it comes with will detect an error if only two out of three legs are connected, and the desk will not function without that third!

Can I purchase an extra set of legs for my Solo Ryzer and convert it to a Corner Ryzer?

Currently, we do not sell individual parts for our Ryzer standing desks. For more information, please feel free to contact our customer service representatives at sales@progressivedesk.com 

Troubleshooting

How do I set the maximum/minimum heights for my Ryzer?

NOTE: The steps below may vary depending on the remote model that you have. The following instructions were made for the standard RT-11 remote.

To set the maximum height for your Ryzer, go to the desired height you would like to set and follow the steps below:

1. Press M and see [5 -] indicated on the display

2. Press the UP button and notice [5 -] blinks

3. Hold the M button until you see [999] on the display

4. The maximum height has now been set

To set the minimum height for your Ryzer, go to the desired height you would like to set and follow the steps below:

1. Press M and see [5 -] indicated on the display

2. Press the DOWN button and notice [5 -] blinks

3. Hold the M button until you see [000] on the display

4. The minimum height has now been set

To reset the limits, follow the steps below:

1. Press M and see [5 -] indicated on the display and release

2. Hold the M you see [555]

3. Limits have been reset

I have to hold down the remote buttons to get to my pre-set height. Is there a way to do this with only one press?

NOTE: The steps below may vary depending on the remote model you have. The following instructions were made for the standard RT-11 remote.

If you have to hold down the remote’s buttons to get to your pre-set height, this means that your control box is in momentary control. To set your remote to non-momentary mode, follow the steps below:

  1. Make sure that there is nothing underneath your desk, as we have to enter the reset procedure


  2. Press and hold the DOWN button until the display shows [ASr]


  3. Once [ASr] is shown, press and hold down [1], and you may see two values:


     a. 10.1 = Non-momentary Mode


     b. 10.2 = Momentary Mode


  4. Complete the reset procedure by holding the DOWN button until your standing desk slightly lowers and rises. 

How do I change the collision detection sensitivity?

Our standing desks have 3 settings for collision detection, and this can be set depending on your preference. To proceed, follow the steps below:

  1. Make sure that there is nothing underneath your desk as we have to enter the reset procedure

  2. Press and hold the DOWN button until the display shows [ASr]

  3. Once [ASr] is shown, press and hold the UP [ ^ ] button and you may see three values:

    a. 10.5 = 11 lbs

    b. 10.6 = 22 lbs

    c. 10.7 = 33 lbs

  4. Complete the reset procedure by holding the DOWN button until your standing desk slightly lowers and rises. 

 

My remote is showing an error code on the display? What should I do?

We have some troubleshooting steps for you to take if you see any of the following error codes on the Mini, Solo, or Corner Ryzer standing desks:

Сheck the error code here.

You may be wondering what about the Economy Ryzer standing desk? Here's a list of steps you can take for this model's error codes:

Сheck the error code here.

If the issue you are experiencing persists after following these steps, please feel free to contact our technical product engineers at 1-800-828-9414 extension 1, or send us an email at sales@progressivedesk.com.

Customer Reviews

Based on 121 reviews
85%
(103)
15%
(18)
0%
(0)
0%
(0)
0%
(0)
100.0
100.0
S
Sean Rotter
Very happy with my purchase

I admit I was a bit worried about ordering a desk online, but the reviews I read put me at ease. The packaging was very high quality and protected the desk when shipping. The quality of the product is fantastic.

Hi Sean,

Thank you so much for your kind words and for taking the time to leave a review. We are thrilled to hear that you are happy with your purchase and that our reviews helped put you at ease. Our team takes great care in packaging our products to ensure they arrive safely to our customers. We are also glad to hear that you are satisfied with the quality of the Corner Ryzer Frame - 90°. Thank you for choosing our product and for being a valued customer. Have a wonderful day!

Best,
Nataliia from Progressive Desk Team

M
Michael Murphy
Great solid desk

Love this desktop! Installation with the Solo Ryzer was simple and fairly quick. The colour of the desk in real life is also way nicer than the colour on the listing (which I think makes the desk look almost sickly...). Docking a star because I couldn't see any included screws for installing the remote at the edge of the desk, and because the edges are a bit sharp so can't rest wrists/forearms against them. Other than that, great product!

Hi there!

Thank you for taking the time to leave a review for our Bamboo Light Matte Tabletop. We're glad to hear that you love the desk and found the installation process to be simple and quick with the Solo Ryzer. If you need any assistance with the remote installation, please don't hesitate to reach out to us!

Best regards,
Nataliia from Progressive Desk Team

F
François Brodeur

hguhyj

Hi there, thank you for taking the time to leave a review! If you have any further questions or concerns, please don't hesitate to reach out. Have a great day!

Best,
Nataliia from Progressive Desk team

Y
Yiwei Xia
Great Frame!

Very sturdy with almost no flex or wobble fully loaded with me leaning on it. I do agree with others that the instructions are adequate but not Ikea levels of foolproof.

Hi Yiwei,

Thank you for your positive feedback on our Solo Ryzer Frame! We are glad to hear that it is sturdy and able to withstand your weight without any flex or wobble. We will take note of your comment on the instructions and strive to improve for future customers. Thank you for choosing our product. Happy working!

Best regards,
Nataliia from Progressive Desk Team

J
Jeffrey Batista Durocher

Desk is sturdy and good quality. Solid frame. I definitely do not regret purchasing this desk.

Hi there,

Thank you for your positive feedback on our Corner Ryzer Desk! We're glad to hear that it is sturdy and good quality, and that you don't regret your purchase. That's exactly what we strive for! If you have any questions or concerns in the future, please don't hesitate to reach out.

Best regards,
Nataliia from Progressive Desk

123
Contact us

Please wait...

1

1
Free Gift

Powered by Salepify App